Everyone Loves And Prints The Production Process.

Popular saying is that

The patterned special paper is evenly covered on the cloth, and the flower paper and cloth slowly enter the high temperature and high pressure heat pfer machine. After the high temperature and high pressure, the original pattern on the paper is quickly gasified, and then pferred to the surface of the chemical fabric to be printed after being fumigated.

Advantages: this type of thermal pfer printing is soft and comfortable with a soft and comfortable handle. The design is bright and full with bright colors, good color fastness and environmental protection.

It is an ideal way of printing.

Disadvantages: only limited

For example, linen, wool, acrylic and other fabrics are not suitable at present.

Screen printing (screen printing) production process, as the name implies, is screen printing, because the technology is widely used. In view of the limited space, this article briefly introduces our factory.

Screen printing process:

(1) first, the aluminum alloy frame with better quality is ground and polished, placed on the wire drawing machine, and evenly coated with glued mesh glue on the surface of the net frame. After the surface is dried, the polyester monofilament gauze with different density is evenly distributed on the top. The tension is measured by the Newtonian tension meter. After the requirement is met, the adhesive is coated again and solidified for more than 1 hours.

(2) flush the stains on the surface of the net, drying, coating the photographic film, the position of the film, the photosensitive, flush development, and the pattern part of the need to be printed.

The edges are non toothed and ghosting, coated with hardener, and then dried at 50 degrees.

So far, a qualified printing plate has been completed.

(3) most of the time, our business orders are mainly knitted products. Therefore, the silk screen materials we use include: self volatile ink, silica gel ink, thermosetting ink, glue, water slurry, bronzing glue, gold and silver powder, etc.

Gold stamping production process:

Most of the fabric is bronzing, and only when the last hot work is done, it needs the gold paper and bronzing machine.

The process is roughly: after the clothes are dry, the clothes are put into the machine, the design is up to the top, the surface is laid on the surface, the gold sheets are coated with gold, and the paper is heated and pressurized. After 10 times, the clothes are removed, cooled, tore off the waste paper, checked, repaired, and neatly packaged --------1 pieces.

About bag printing, ribbon printing

Whether it is

At present, most of the printing processes on the market are the 3 printing processes introduced in this paper. The only difference is that the selected printing materials are different.

On the surface of the foam printing, on the surface of the cloth, use the screen plate to print the glue or thermosetting ink which has been made of foaming powder, then dry it at low temperature, cool it, and enter the press or dryer for constant temperature foaming at about 140 degrees. The height of the foaming can be determined according to the requirements of the customer.

In addition to ordinary foaming, it can also be used for imitation flocking and foaming.

With the progress and development of science and technology, some new technologies, new materials and new methods will continue to enter our field of printing. It will bring more benefits to the public and bring more beautiful clothes to all the handsome men and women.